PS4 CE-32809-2 | Application Error [3 Ways To Fix It]

PS4 gamers are recently facing a “cannot start application” error CE-32809-2.  This PS4 application error prevents them from being able to play downloaded games such as Trover Saves The Universe. Here, we will be looking at what is this error, what causes it as well as a few easy solutions to address this error.

What is Error code Error CE-32809-2?

PS4 Error CE-32809-2 is an error code that brings an error message like cannot start the application. You can’t play downloaded games once it shows. There are super-easy solutions to fixing PS4 error CE-32809-2 so you can unlock and enjoy your downloaded games.

What causes the PS4 Error code Error CE-32809-2?

PS4 Error code Error CE-32809-2 is usually caused by the PS4 firmware update 6.70. However, there are easy fixes that will allow gamers to enjoy their downloaded titles in mere seconds. The error is a short code for the system being unable to find the correct update file to update the console. Most likely, the error occurs because the present firmware is older than the oldest firmware currently allowed by Sony for offline use.

Error CE-32809-2

What to do to fix This Application Error?

Below you’ve got a set of methods that other users during a similar situation have wont to get the difficulty resolved. For the simplest results, follow the methods within the order that they’re presented.

Solution 1: Restart PS4 via Safe Mode

Several users have reported having the ability to repair the CE-32809-2error when they Restart in  Safe Mode. 

Here’s a fast guide the way to restart the PS4 via the Safe Mode menu:

Step 1: Power your PS4 completely (make sure it’s not in sleep mode).
Step 2: Press Power button. Hold it till you hear two beeps. After that, stop pressing and wait for your console to enter the Safe Mode menu.
Step 3: Connect your Ps4 DualShock controller via a USB cable and press the PS button to pair it.
Step 4: Connect Dualshock controller to PS4 via USB cable
Step 5: Select Restart PS4 and press X to reboot your console via Safe Mode.
Step 6: Restart Ps4

Things should be okay and you should be able to update your firmware version via the Dashboard. If the procedure above led you to an equivalent CE-32809-2error code, continue down with the subsequent method below.

Restart PS4 via Safe Mode

Solution 2: Updating the console via Safe Mode

Most users encountering the CE-32809-2 error code have managed to get it to work by using Safe Mode. Update the firmware with internet or USB. This procedure won’t cause you to lose any save or application data.

Here’s a fast guide updating the console’s firmware via Safe Mode:

Step 1: Make sure that your PS4 is powered off completely (not in sleep mode).
Step 2: Download a fresh firmware version. Then, store on an external USB.
Step 3: Press the Power button. Hold till you hear two beeps. You have entered the Safe Mode menu.
Step 4: Next, connect your Dualshock 4 controller to your console via a USB cable and press the PS button to proceed.
Step 5: Connect controller to Ps4 via USB cable and press PS button
Step 6: Next, scroll right down to option 3 (Update System Storage) and press the X button.
Step 7: Update system storage
Step 8: Next is to select Update Using Internet. If no internet, use USB like step 2 and select Update from USB.
Step 9: Updating the PS4 firmware version via Safe Mode
Step 10: Wait until the method is complete, then reboot your computer and see if the error code is fixed.

If the error code remains not fixed, move right down to the subsequent method below.

Solution 3: Restoring Ps4 settings to the defaults via Safe Mode

If the primary two methods have proven to be a bust, let’s restore the settings. Here’s a fast guide restoring the PS4 settings to de default using Safe Mode:

Step 1: Power your PS4 completely. Make sure it’s not sleeping.
Step 2: Press the Power button. Hold till you hear two beeps. Then wait for the PS4 to enter the Safe Mode menu.
Step 3: Connect your Ps4 DualShock controller via a USB cable and press the PS button to pair it.
Step 4: Connect Dualshock controller to PS4 via USB cable
Step 5: From the Safe mode menu, select Restore Default Settings and press the X button.
Step 6: Restoring to the default PS4 settings
Step 7: Next, use the thumb stick to choose Yes and press the X button to revert all settings to the default values.
Step 8: Revert Ps4 settings to default values
Step 9: Reboot your console and see if the Error CE-32809-2code is removed. 

Solution 4: Initialize PS4 via Safe Mode

If there’s still no solution, let us try reinstalling the system software. Some users have confirmed that this worked in allowing them to fix the CE-32809-2 error code. Here’s a fast guide the way to initialize your PS4 via the Safe Mode screen:

Step 1: Power your PS4 completely and make sure it’s not set to sleep mode.
Step 2: Press the Power. Hold till you hear two beeps. Then, wait your console to enter the Safe Mode menu.
Step 3: Connect your Ps4 DualShock controller via a USB cable and press the PS button to pair it.
Step 4: Connect Dualshock controller to PS4 via USB cable
Step 5: In the Safe Mode menu, scroll down to option 7. Initialize PS4 (Reinstall System Software). 
Step 6: Initialize and restart Ps4 & reinstall software update
Step 7: Finally, confirm by selecting Yes and pressing the X button.
Step 8: Confirm Initialization process
Step 9: Reboot your console. You should not see the CE-32809-2 error code.

Conclusion

If none of these fixed the issue for you, we recommend using Restoro Repair Tool which can scan the repositories to replace deleted files. It will also optimize your system for maximum performance. For other PlayStation errors codes click here.

You May Want To Read
PS4 Error Code CE-30002-5 When Trying To Update[Solved]

Leave a Comment