Windows Update Error 0x8024a105 [Solved]

It is important to get the latest Windows 10 updates in time to protect your Windows PC from malicious attacks. However, sometimes you’re unable to get these updates due to Windows update errors. In this article, I’m going to show you how to troubleshoot the windows update error 0x8024a105.

What is Windows Update Error 0x8024a105?

Windows Update error 0x8024a105 is one of the most common windows update errors you may encounter.  The error message reads; There were problems downloading some updates, but we’ll try again later. Once this message pops up on your screen, you need to look for a solution immediately.

Windows Update Error 0x8024a105

What causes this Windows Update Error 0x8024a105?

This error is usually caused by the following; 

improper installation 
a virus attack
missing or corrupted files

Nonetheless, once you see this error on your screen, you need to fix it with the steps I detailed within the next section.

How to Fix the Windows Update Error 0x8024a105

You can fix this error by following the detailed steps below.

Solution 1: Run the Windows Update Troubleshooter

You can easily run the Windows Update Troubleshooter by following these steps;

Step 1: Enter troubleshoot in the Windows 10 Cortana search box. Click on the best match Troubleshoot settings.
Step 2: Click the Troubleshoot to expand the option.
Step 3: Click Run Troubleshooter.
Step 4: Click Windows update.
Step 5: Click Run the troubleshooter.

When you launch the troubleshooter, it starts detecting problems. Once this is over, you need to follow the on-screen instruction to fix the problem.

Solution 2: Check Your Internet Connection

Internet connection issue can cause the Windows Update error 0x8024a105, thus you need to check for the following points;

Ensure that your current Internet connection is normal. Then, switch your Internet connection.
If you’re using a LAN connection, consider switching to Wi-Fi. If you are using Wi-Fi, connect to a wired connection, preferably using Category 5 cables. 

If the error is still not fixed, move down to the next potential solution below.

Solution 3: Reset Software Distribution Folder

You can reset the software distribution folder by following the steps below;

Step 1: Enter cmd in the Windows 10 Cortana Search box. Choose the best match Command Prompt and click Run it as administrator.
Step 2: Open the command prompt window and type the following commands one by one. Click Enter after each one.

net stop bits

You May Want To Read
Connect Error 10060 | Attempt To Connect Timed Out [Quick Fix]

net stop wuauserv

Step 3: Type Win+ R key to open the Run dialog box. Then enter the following command to open the Software Distribution folder on your computer.

C:\Windows\SoftwareDistribution

Step 4: Select all the files in the Software Distribution folder and delete all of them. Don’t rename or delete the Software Distribution folder. 
Step 5: Enter the following commands in the Command Prompt (Admin) window.

net start bits

net start wuauserv

Step 6: Reboot your computer and check if the error is still there.

Once you completed the operations, Windows 10 will reconfigure the Software Distribution folder and re-download all the necessary files on its own. If the error is not fixed, go down to the next potential solution below.

Solution 4: Run the DISM Tool

You can easily run the DISM tool by following these steps;

Step 1: Enter cmd in the Windows Cortana search box, click the top result, and select Run as administrator.
Step 2: Enter the following DISM command to repair corrupted system files and press Enter.

dism.exe /Online /Cleanup-image /Restorehealth

Run the DISM Tool

Solution 5: Perform a Clean Boot

You can easily perform a clean boot by following these steps;

Step 1: Type Win+ R key to open the Run dialog box.
Step 2: Enter msconfig and hit Enter.
Step 3: Access the Services, check Hide All Microsoft Services and select Disable All.
Step 4: Access the Startup tab and select Disable All. If there is no disable all option, click the Open Task Manager.
Step 5: Select each task and click Disable one by one.
Step 6: Restart your computer.

If the error is still not fixed, go down to the next potential solution below.

Solution 6: Reset the Catroot2 folder

You can reset the Catroot2 folder by following the steps below;

Step 1: Enter cmd in the Windows 10 Cortana search box, and right-click the best match to run the Command Prompt as administrator. 
Step 2: Enter the following commands in the Command Prompt window:

net stop cryptsvc

You May Want To Read
DNS Server Isn't Responding Error [100% Solved]

md %systemroot%\system32\catroot2.old

xcopy %systemroot%\system32\catroot2 %systemroot%\system32\catroot2.old /s

Step 3: Delete all of the files in your Catroot2 folder. Press Win + R key to open the Run command and then enter the following commands.

C:\Windows\System32\catroot2

Step 4: Run the Command Prompt as an administrator and enter the following command:

net start cryptsvc

Step 5: Restart your PC and try updating your Windows once again.

If the error is still not fixed, go down to the next potential solution below.

Solution 7: Reinstall Windows 10

This is the final fix. You can reinstall windows 10 to the latest version by following the steps below;

Backup System Disk with Free Disk Cloning Software

You can easily back up the system disk with these steps;

Step 1: Launch your backup software to get the main interface.
Step 2: Choose Copy Disk from the left action panel.
Step 3: Select a target disk to copy the source content to and click Next. Ensure that you choose the right disk and go on. Every data in the target disk will be lost, so ensure there is no important file on the disk or you’ve made backups in advance.
Step 4: Review the changes you’re going to make and click Next.
Step 5: After reading the note which tells you how to boot from the destination hard drives, Click Finish.
Step 6: Click Apply to allow the pending operations.

Reinstall Windows 10

Reinstall Windows 10

After you’ve backed up the system disk, you can download and reinstall Windows 10 to the latest version. When you’re done reinstalling Windows 10, the Windows update error 0x8024a105 should be fixed.

Conclusion

Windows Update error 0x8024a105 is a common windows update error encountered by many users. It is quite easy to fix. Sometimes you would have to reinstall Windows 10 to fix it. In this article, I have provided you with the solutions to help you fix it. Now it’s your turn to perform these solutions and conquer this error.

Leave a Comment